Adjusting the Drop-Tine Release Trigger Tension
- Loosen the smallest set screw on the bottom side of the release.
- To increase the tension required to fire the release, turn the screw clockwise on the hook side of the release.
- Once the desired trigger tension is achieved, tighten the small set screw on the bottom of the release until it is snug. Do not overtighten.
The Drop-Tine Release comes with an optional coiled spring that is heavier for an increased trigger pull if a heavier trigger tension is desired. To install, follow the steps above and remove the factory spring from the screw on the hook side of the release. Adjust to the desired tension.